Generally the final energy demand of the industry is simulated as a function of changes in population, in economic activity and in energy intensity. We simplify and consider the demand for energy to be a function of 3 groups of parameters and processes: 1) activity data, i.e. population, income and more explicit, bottom-up, activity indicators such as steel productions;2) processes that determine the intensity of use, such as structural change (SC), autonomous energy efficiency improvement (AEEI) and price-induced energy efficiency improvement (PIEEI) and, finally, and 3) price-based fuel substitution i.e. the choice fuels on the basis of their relative costs.
Heavy industry model – Steel and Cement-
The demand for raw materials can be described as a function of per capita income levels (Groenenberg, 2002; Neelis and Patel, 2006; Roberts, 1996; Tilton, 1996; van Vuuren et al., 1999). Empirically, it has been observed that the general form for resource intensity often follows an inverted U-shaped curve. The inverted U shape can be explained in terms of superposition of three different trends: transition, substitution and technological development (van Vuuren et al., 1999). There are a number of possible formal descriptions that can be chosen that are able to describe an inverted U-shape. Based on discussion in Roorda (2006) and Neelis and Patel (2006) we here use:
- IU = Intensity of Use (kg/$)
- GDPpc = Gross Domestic Product per capita (2005 PPP$)[1|file:///Y:/ontwapps/Timer/ADVANCE/model%20documentation/WIKI/WIKItemplate.docx#_ftn1]
- α = Maximum total consumption per capita (PCC) and
- β = GDP per capita level with the maximum IU
To account for changes in the maximum per capita consumption due to increased material efficiency, an additional factor was introduced:
where the constant θ can be interpreted as the annual material efficiency improvement factor. If material efficiency improved by 1% per year, the value of θ would be 0.99.
We used regression analysis to parameterize the PCC function to historic data, deriving values for α, β and θ in the formulas above (see Neelis and Patel, 2006; Roorda, 2006). Cement is based on a single global regression --that is in a second step adjusted for each region (see further). For steel demand, instead, we used regression analyses for major individual regions, to reflect different consumption patterns in these regions (Neelis and Patel, 2006). We use a Gompertz curve to smooth out deviations between historic data and the PCC curve:
In this, Δ2005 is the deviation between actual and estimated per capita consumption and μ and ϕ are Gompertz parameters, with values chosen to remove the deviation over a period of 40-50 years.
The scenario factor (Ω in eqn. 4) allows for more or less material intensive future scenarios. This factor acts as a multiplier on the PCC values, and its values extrapolate linearly between 2005 and 2100 to 0.9 for material extensive scenarios and 1.1 for material intensive scenarios. Using historical data on steel and cement consumption a regression analysis was performed to derive values for the parameters α and β.
Vintage stock turnover
In the model, we assume that all demand for steel and cement is fulfilled, either through domestic production or trade with other regions. We use a vintage capital stock model to simulate the development of the steel and cement producing capital stock over time. In case of declining demand, it is possible that there is too much production capacity compared to the actual demand and production is scaled back proportionally for all plants.
Investment costs are a relatively large part of production costs of steel and cement plants. Therefore, it is usually cheaper to use an existing facility than building a new one. Hence, we assume that all factories are used until the end of their technical lifetime (assumed 40 years), which brings clear inertia into the model.
Specific Energy Consumption
For each cement and steel production technology, we assume a specific energy consumption (SEC): the amount of energy that is needed to produce a ton of the respective material. This SEC is assumed to improve over time. For future projections, we split the SEC in two components: 1) the minimum energy use for each technology assuming zero losses and the 2) additional energy required due to inefficiencies in the technology. We make assumptions on the future rate of efficiency improvement based on literature (Gielen et al., 1998; Groenenberg, 2002; IEA, 2009b; Neelis and Patel, 2006) and generalize this function as follows:
β = Minimal energy needed (in gigajoules (GJ) per tonne of material)
ε = Efficiency improvement every year (%/yr)
α = Total inefficiency in the year 2005 (GJ/t)
t = year for which SEC is calculated
The TIMER model simulates historic energy use for all sectors and regions from 1971 to 2007, before calculating scenarios forward into the future. To replicate historic energy use, we assume that factories have a marginal energy intensity (SEC) at the moment of being built that equals the observed average historic SEC of the entire capital stock fifteen years later. The model has been run with this assumption and the average energy use of the total stock in the model was within 10% of the historic data.
The SEC values used in this study represent only energy use in the factory, defining the system boundaries of SEC values as factory gate-to-factory gate. This excludes energy use related to the production of raw materials, which could be relevant due to gradually decreasing ore quantities. For copper, Harmsen et al. (2013) show that in the case of ambitious implementation of renewable energy, the cumulative energy use across the process chain increases by a factor of 2 to 7 depending on technological progress, the recycling rate and the future electricity demand. Although the Reserve / production (R/P) ratio of iron is three times as large as that of copper, it is quite possible that, in the longer term, lowering ore grades will result in higher GER of primary steel.
Multinomial logit market allocation
The TIMER model uses a multinomial logit for market allocation of new investments (to determine the share of different competing technologies:
- Si = the share of option i
- pi = price of option i in $/tonne (or $/GJ for energy carriers)
- λ = Logit Factor
- n = the number of options
This equation basically assigns the largest share in investments to options with relatively lowest costs. The logit factor λ represents the cross-price elasticity and determines how “strong” the function responds to price differences between options. The larger the value of λ the stronger impact price differences have on the market allocation. The value of λ is based on historical price differences and market allocations.
The allocation of energy carriers and production technologies takes place in two steps of nested multinomial logit formulations. First, the share of energy carriers for each production technology is determined. For steel and cement production technologies without preference for certain energy carriers, such as cement kilns, we assume the allocation of energy carriers to each technology is only based on energy prices. Other technologies, however, are restricted to certain energy carriers, such as an EAF for steel production that require a minimum share of electricity. For these technologies, minimum shares of certain energy carriers are prescribed, whereas the remaining share is filled by cost-based allocations. After allocating energy carriers, the costs of production from each technology can be determined, and market allocation is done for technologies.
Second, the total costs for production technologies are determined, including energy costs (based on the energy carrier allocation above), annualized investment cost, O&M cost and in case of cement potentially carbon taxes for process emissions. Production technologies are allocated based on the total costs to produce a tonne of steel or cement.
Trade is modeled through dedicating new investments in production capacity to specific world regions. This capacity remains dedicated to a specific region for its entire lifetime. Once market shares for technologies have been assigned, the model determines in which region to build new production capacity. The main drivers of trade between regions in this model are the relative production costs per region, the transport costs between the main ports of the two regions, and a scenario dependent trade barrier between regions. This implies that in fact energy prices drive the production capacity for steel and cement, as most other cost-components are assumed similar. Also here, a multinomial logit formulation is used, based on the average production cost in regions. Based on historic observations, we assumed that there is a strong preference to produce steel and cement within the region itself.
In the scrap model, we assume three types of scrap: metal that is lost during the production of the metal itself (circulating scrap), metal that is lost during the production of goods (prompt scrap) and scrap that is available after the lifetime of the goods (obsolete scrap). We actually assume circulating scrap to be part of the steel production process, because nearly all of it is recycled and it never leaves the system boundaries of the steel plant. We assume that prompt scrap is available for recycling immediately, with a recycle rate of 70%. Obsolete scrap is determined by identifying 4 types of steel uses, each with a typical lifetime in society. After steel in certain functions has reached the associated lifetime (starting from the production year), it is available again to be recycled. Representative examples for each of the four product groups are 1) construction, 2) machinery, 3) cars and 4) soda cans. Table 3 gives more information of the product groups and Figure 4 shows the availability for recycling of the different product groups in the years after they have been produced. The recycle rate of metal that becomes available to use as obsolete scrap is assumed 70% (Neelis and Patel, 2006). Scrap is not traded internationally in this model. One reason is that it would require determining a regional scrap price – for which we did not find enough information to include this in the model.
Table: Overview of the product groups used in for obsolete scrap
Assumed share in Steel Consumption
Assumed average Lifetime
Assumed standard deviation
Technologies and assumptions for producing steel and cement
The iron and steel production model includes seven technology options:
- Standard Coal Blast Furnace (BF) + Basic Oxygen Furnace (BOF)
- Efficient Coal BF + BOF
- Efficient Coal BF+ BOF + CCS
- Direct Reduced Iron (DRI) + Electric Arc Furnace (EAF)
- DRI EAF + CCS
- Scrap EAF
- COREX smelt reduction + BOF
- COREX smelt reduction + BOF + CCS
The cement production model includes four technologies:
- Standard dry feed rotary kiln[2|file:///Y:/ontwapps/Timer/ADVANCE/model%20documentation/WIKI/WIKItemplate.docx#_ftn2]
- Efficient dry feed rotary kiln[3|file:///Y:/ontwapps/Timer/ADVANCE/model%20documentation/WIKI/WIKItemplate.docx#_ftn3]
- Efficient dry feed kiln with on-site-CCS
- Efficient dry feed kiln with oxy-combustion CCS
[2|file:///Y:/ontwapps/Timer/ADVANCE/model%20documentation/WIKI/WIKItemplate.docx#_ftnref2] This means: a raw mill, a pre-heater, a pre-calciner, a rotary kiln and a cooler, with simple exhaust heat recovery and fuel preparation.
[3|file:///Y:/ontwapps/Timer/ADVANCE/model%20documentation/WIKI/WIKItemplate.docx#_ftnref3] As standard, but also with: improved process and fuel control systems, more efficient pre-heaters and pre calciners and an improved cooling/heat recovery systemThe heavy industry submodule was included for the steel and cement sectors (Van Ruijven et al., 2013). These two sectors represented about 8% of global energy use and 13% of global anthropogenic greenhouse gas emissions in 2005. The generic structure of the energy demand module was adapted as follows:
- Activity is described in terms of production of tonnes cement and steel. The regional demand for these commodities is determined by a relationship similar to the formulation of the structural change discussed in the demand section. Both cement and steel can be traded but this is less important for cement. Historically, trade patterns have been prescribed but future production is assumed to shift slowly to producers with the lowest costs.
- The demand after trade can be met from production that uses a mix of technologies. Each technology is characterised by costs and energy use per unit of production, both of which decline slowly over time. The actual mix of technologies used to produce steel and cement in the model is derived from a multinominal logit equation, and results in a larger market share for the technologies with the lowest costs. The autonomous improvement of these technologies leads to an autonomous increase in energy efficiency. The selection of technologies represents the price induced improvement in energy efficiency. Fuel substitution is partly determined on the basis of price, but also depends on the type of technology because some technologies can only use specific energy carriers (e.g., electricity for electric arc furnaces).
A brief overview is presented here, for more information see the IMAGE 3.0 web page.